Free shipping in the US! - 100 day return policy

How to use The Pocket Scientist wallet sized ruler and reference card

The Pocket Scientist is an every-day carry tool designed for scientists and engineers. We've packed as many handy tools and references as possible into this little laser-engraved stainless steel card to make your technical work a little easier every day. 

If you don't yet have your own, you can order your Pocket Scientist through our store or through Amazon (Prime eligible)

 

1.    Angle measurement and drawing tool

The left front contains a 180 degree arc for measuring and drawing angles. The long lines are every 10 degrees and short lines are every 5 degrees. The straight line cutout denotes 90 degrees and can help to quickly draw right angles.

To draw or measure your own angle:

  1. Align a starting straight line to the flat edge on the outside of the tool.
  2. Add a center dot to denote your vertex, in the gap at the center of the arc tool.
  3. Add a dot at the angle you wish to draw. If measuring, find the angle where the line to be measured intersects.
  4. Slide away The Pocket Scientist and use the straight edge to connect your dots and complete your angle.

2.    Arc drawing tools (inches and centimeters)

The through holes lines up with major inch and centimeter markings are for drawing arcs and circles of the corresponding radii.

To draw a 6 centimeter radius 60 degree arc:

  1. Create a vertex, 0 degree and 60 degree dots using the angle drawing tool described above
  2. Line up the half-hole at 0 cm to your vertex dot and the 6 cm hole to your 0 degree angle dot.
  3. Using two pencils (or one pencil and a sharp narrow object), put one in each hold and with a slight inward pressure drag the 6 cm hole in the desired direction until it covers approximately 60 degrees. Keeping slight inward pressure ensures the arc does not come out jagged.
  4. Use the straight edge to connect your vertex and 60 degree dots, then extend the line out until it intersects your new arc. Simply put a dot at the intersection if you don’t want the connecting line.
  5. Erase any arc past the intersection point.

To draw an arc with a 0.5 cm, 0.5 inch, 0.25 inch or 0.125 inch increment:

  1. Repeat step 1 above.
  2. Instead of using the edge half-hole, start your vertex at the sub-integer hole and count forward to the desired radius, remembering to subtract the distance from the edge to the hole of your vertex.
  3. Repeat steps 3-4 above.

4.    Periodic table

The Pocket Scientist contains a full periodic table. The Lanthanide and Actinide series’ are at the bottom and a double-thick vertical line denotes where they are inserted in the upper periods. The left side contains a quick reference atomic number for the Group I elements. For Group and Period, simply count from one left-to-right and top-to-bottom respectively.

5.    Ruler

The centimeter side is marked to each 1, 5 and 10 mm while the inches side is marked down to the 1/32nd inch where each smaller unit has a shorter mark line. Note that the origin (zero) side starts flat (flush) to the edge of the tool. This allows you to easily measure the height or depth of an object on a flat surface. For the highest precision on paper, start your line at the “1” marking instead of the edge. For machinists, we’ve also included a small mils ruler on the right edge. Each long line is 100 mil apart, while the shortest lines are 10 mil apart.

6.    Phone stand

Simply insert a sturdy credit card into this slot, about three fourths of its length and set on a flat surface. Lay your phone horizontally against The Pocket Scientist and now you have a pop-up phone stand! This takes a little practice and may not work with thick phone cases, large phones or flexible credit cards. Test it gently at first to ensure you don’t snap your credit card from the weight of your phone.

7.    Quarter inch hex bolt hole

The top right of the card has a small hexagon which will help loosen a quarter inch hex bolt and doubles as a place to clip a carabiner or keychain.

8.    QR Code for bonus content

Scan the QR code with your phone each calendar month to view a private page just for card holders. This QR code is obscured in product photos online, so think of this as an exclusive bonus of being a card holder! Each month, we’ll replace the page with new content such as fun science nuggets, science jokes, new resources we’ve found or created, news or upcoming events and discounts on new product launches just for card holders! Our goal is to bring you value, fun and happiness with every scan.

 

Related Posts

The 22 best science podcasts of 2019 that you've probably never heard of
The 22 best science podcasts of 2019 that you've probably never heard of
We've scoured the internet, social media and the blog-o-sphere for niche and under-appreciated podcasts about science, r
Read More
The Easiest Way to Draw a Cyclohexane Chair Conformation and Ring Flip
The Easiest Way to Draw a Cyclohexane Chair Conformation and Ring Flip
Drawing the cyclohexane chair conformations adds unnecessary stress to most chemistry students. Follow the steps below t
Read More

Leave a comment

Please note, comments must be approved before they are published